吸收式干機

◆成品優勢特點 Product features

※體現了安全相一致的撒氣壓為和露點

1.物理吸附塔之層面與直徑經科學實驗結果顯示高精密算，塔床內壓小，衡量了文件壓縮氣物干燥處理劑5秒的了解時候，做到生產設備氣的露點追求。

2.30％的太干劑留量，用以賠償標準太干劑的大自然氧化，加強組織領導太干。

3.專業擴散作用器，保證 氣體平均經過吹干劑層，排除溝流干涉現象。

※二次利用氣量材料耗費大于14％

1.匠心的機筒設計，存為100％的吸附劑熱量，永久保存的熱量代替增多回收利用環節的回收利用氣溫差，加強設備的解吸作用，更加回收利用更徹徹底底。

2.吹干和回收選擇反相煙囪效應工作方案，濕空氣的走過干的吸收劑期限果較好的。回收氣進口商含濕量掌握在亞過剩狀態下，使消音器原理器及改裝排氣管區域無起霜之慮。

3.可基于缺水機的操作短路電流使用需求設定凈化氣運用量，保障凈化熱空氣間隔穩定可靠，凈化壓強低至臨介。

※干劑安全使用人類使用壽命長

1.應該的機筒尺寸大小，使氣體經過吹干劑層的流動速度和時長要保持好的方式，多方面引領吹干劑的的性能。

2.合情合理的軟件系統安裝，在氣體進入到機筒前，經除油解決實時清楚氣體中內植物油成分物與重危害物，以防粗糙劑層受危害。

※儀器主要采用了大氣高品質直流電動及手動閥和靠普的全光學可程序設計序操作器，人與機器工具欄很友好，電腦自動聯續提示 雙塔負荷率，反復周期公式活動現場可編，出貨因素10min。止回閥使用時間算長50萬次的動作。

※筒節內壁上作冷鍍鋅板防腐蝕進行處理，10年不氧化。

※行動明確、耐熱性比較穩定、操控用簡，按照不必根基。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆一般高技術性能 Main technical parameters